Items (0)
£0.00

Wind Hobby MONSOON 900 Radio Controlled Racing Yacht

  code:REB71-F03 MONSOON KIT
£134.00 (Delivery from £9.50)
RRP: £189.00 You Save: £55.00 (29%)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Monsoon 900 1.8m high RC Racing Yacht KIT

Features:

  • High Quality ALL FIBRE GLASS CONSTRUCTION
  • Servos pre-Installed.
  • Complete with Competition Synthetic Polyester Fabric Sails.
  • Metal Geared Winch Servo.
  • LowDrag Composite Hull Design.
  • Large Area Deep Water Rudder.
  • Removable Keel with ballast bulb.
  • Factory Painted 95% Fully Assembled.
  • This KIT version does not include a Transmitter or receiver.
  • Its is not a toy! A 100% Hobby Racing Yacht.

 

The Monsoon 900 RC Competition Yacht that has been designed from the keel up to handle like a full-scale racing yacht - not a toy like other RC sail boats. At 35" in length, the hull is made of Composite fibreglass (FRP) giving maximum strength as well as a smooth and slippery surface. It has a removable racing keel with ballast-bulb and a large area deep water rudder, which together keep the yacht on its controlled heading at all times. The Mast is made of high strength aluminium alloy and the surface is oxygenation treated to reduce corrosion in salt water.
The rig is of professional quality and very rigid even in high winds further increasing efficiency and Speed. It's very easy to assembly or adjust by yourself. The sail is made of Synthetic High Density Terylene fabric which is resistant to stretching under high wind gusts and the angles are further strengthened. The deck is decorated with some plastic fittings adding to the realistic look. The large scale size of the Monsoon 900 also make it a stunning exhibit in a room or window.
Here's just a few of the features that make this Low-drag composite hull design with large 900mm over-all length. Removable racing keel, with ballast-bulb, large area deep-water rudder that, working together, keep the Monsoon 900 on precisely controlled headings at all times. All rigging is mounted up to a super-ridged Alloy main mast and fully proportional sail winch that allow the sails to be trimmed for absolutely any combination of wind conditions and heading dynamic such as: close reach, broad reach or running with the wind. From stays to clew fasteners, The Monsoon 900 is absolutely regatta ready in
minutes from opening the box.

Contents:

  • Monsoon 900 Racing Yacht
  • Sail, mast & boom
  • Keel & Bulb
  • Rudder assembly
  • Ready built GRP Painted hull
  • Hull Supports
  • Hatch Cover
  • Metal geared winch servo (already installed)
  • Rudder Servo & Linkages (already installed)
  • Accessories
  • Instruction manual

 

To complete you'll also need:

Your own 2 channel Radio, receiver and battery pack.
Small Lead shot (size 9-12)

 

Note: The ballast bulb requires 1600g of lead shot. We suggest 2mm or smaller to enable enough weight into the bulb. Shot size 9-12 (9=2mm, 12=1.57mm dia.)

We recommend pouring in some epoxy resin to seal and strengthen once you have found your preferred weight. You can temperately seal it with some hot glue for testing.

 

Specifications:

    Boat Type: Radio Control Racing Yacht
    Overall Length: 900mm
    Hull Material: All Fibre Glass Construction
    Sail Area: 0.38m Squared
    Mast height 1300mm
    Overall Height: 1800mm
    Net Weight: 2500g (including ballast)

 

Be the first to review Wind Hobby MONSOON 900 Radio Controlled Racing Yacht . Write a review ›