1/8th Scale Top Spec LiPo Brushless Electric Powered Advanceed On-Road Race Car
This superb model from HSP come in 3 build variations from the factory, Standard Spec, Pro spec and this TOP spec version.
In addition to the Pro spec version you get a higher torque (lower KV) brushless motor and larger 80A programmable ESC, up rated gear boxes with faster gearing and a lot of aluminium parts.
This TOP2 spec version is one serious road racer and 33% faster than the Pro out the box with its supplied 11.1V 3S 3600mAh Lipo battery.
Features:
- TOP2 Spec model with Racing Brushless Motor
- Complete package, ready to race
- Comes with everything pre-assembled
- Four wheel Shaft drive
- Extra large foam protection front bumper
- 2618KV Higher torque brushless motor
- 80A High precision brushless ESC (Hobbywing Ezrun S8)
- Anodised Aluminium Motor heat sin
- 6061 Anodised Aluminium chassis
- 6061 Anodised aluminium shock support towers
- Fan cooled motor and ESC for Hi speed 3 cell Lipo racing action
- Top quality on-road tyres
- Pistol grip 2.4GHz digital proportional radio control
- Top quality oil filled adjustable shock absorbers
- Metal centre gearbox and differential
- 11.1V 3600mAH large capacity rechargable Lipo battery
Package Contents:
- Pre Built TOP2 spec Car
- 11.1V 3600mAH Lithium Polymer Rechargeable battery
- Lipo Balance Charger and UK Power supply
- 2.4GHz Radio
- Instructions and Spare Parts Manual.
You'll need:
8 x AA Batteries for the transmitter. (Available in our store)
Car Specifications:
- Motor: 2618KV brushless
- Hobbywing S8A 80A brushless with OTP and UVP (Programmable).
- Fan cooled motor & ESC
- Drive: Four wheel shaft Drive
- Length: 580mm
- Width: 303mm
- Height: 155mm
- Wheel: 109mm X 41mm
- Wheel base: 325mm (F/R)
- Ground clearance: 20mm
- Gear ratio: 9.144:1
- Rechargeable car battery: 11.1V 3600mAH Lithoum Polymer.
- Charger: UK Lipo 2s-3s balance charger & Power supply.
ESC Specifications:
- Hobbywing S8 Programmable speed controller
- Current Rating: 80A continuous.
- Voltage Rating: 6V - 14.4V (2S-4S Lipo)
- BEC: 5.75V @ 3A (Switch mode power supply)
- Fan Cooled: Yes - from BEC circuit.
Programmable features:
- Running Modes (3)
- Drag Brake force settings (8) 0 - 100%
- Low Voltage Cut-off: (None, 2.6V/C, 2.8V/C, 3.0V/C, 3.2V/C, 3.4V/C)
- Start mode (Punch): 9 Levels.
- Maximum Brake Force: 25%, 50%, 75%, 100% or disabled.