VP Racing 7.4V 3300mAh 30C Lipo Car Battery with round Hardcase & Tamiya connector

7.4V 3300mAh 30C Lipo Rounded Hardcase Car Battery with Tamiya connector.

This 7.4V Lithium Polymer Race from VP Racing pack comes in a standard race pack shaped hardcase. Unlike most car lipo's, this one will fit any model which using a standard race pack without any modifying of the battery compartment. Currently available with either ES2 bullets or Tamiya gold pin connectors. For higher powered brushless setup's we highly recommend ES2 connectors (90A) over standard Tamiya (25-30A max)

Perfect upgarde to boost your 1/10th scale brusless cars, buggys and Monster Trucks with a 46% weight saving over the same size NiNh pack.

IMPORTANT - Only charge Lipo  batteries using a Lithium Polymer battery charger. Never used a NiMh or any other type of charger.


Specifications:

• MPN: RD330-T1
• Voltage: 7.4V
• Capacity: 3300mAh (30C)
• Max discharge current: 99A continuous. (198A Burst 10sec)
• Maximum charge: 2C.
• Size: L138 W46.5 H25
• Weight: 202g
• Wires: 120mm 12AWG High flex silicon
• Power connector: Standard Tamiya with gold plated piins
• Balance connector: 2.0mm JST-XH (3P)

Specifications:

• MPN: RD330
• Voltage: 7.4V
• Capacity: 3300mAh (30C)
• Max discharge current: 99A continuous. (198A Burst 10sec)
• Maximum charge: 2C.
• Size: L138 W46.5 H25
• Weight: 202g
• Wires: 120mm 12AWG High flex silicon
• Power connector: Standard Tamiya with gold plated pins.
• Balance connector: 2.0mm JST-XH (3P)

You can download the RD330 technical datasheet here