Items (0)
£0.00

Alloy Servo Arm Heavy Duty 24T spline for HSP, Windhobby Hitec servo's

  code:AL-SERVO-ARM-24T
  • Offers Available
  • Buy 3 or more items for 5% off (use code 5%OFF at the shopping basket)
£6.50 (Delivery from £0.99)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Alloy Servo Arm Heavy Duty 24T spline to fit HSP, Windhobby Hitec servo's

Used for high torque steering servos from HSP or Hitec which use a 24 tooth spline. Secured using 2 set screws to clamp to servo shaft.

Two ouput holes are threaded M3 to take ball joint fixings and are spaced at 20mm and 24mm from centre.

  • Overall Length: 35.5mm
  • Centre to end dimension: 28mm
  • Centre to holes: 20mm and 24mm
  • Height: 6mm
  • MaxDiameter: 15mm at centre.
  • Arm width at end: 8mm
  • Spline diameter: 5.6-6mm
  • Overall Length: 35.5mm
  • Centre to end dimension: 28mm
  • Centre to holes: 20mm and 24mm
  • Height: 6mm
  • MaxDiameter: 15mm at centre.
  • Arm width at end: 8mm
  • Fixings: 2 x 1.5mm Set screws.
Be the first to review Alloy Servo Arm Heavy Duty 24T spline for HSP, Windhobby Hitec servo's. Write a review ›