Items (0)

iMAX NEW Digital LiPo LiON NiMH Battery balance & fast field charger

Now £29.95 (Delivery from £4.75 )
Was: £39.95 You Save: £10.00 (25%)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Imax B6 Professional Intelligent Balance field Charger  (11-18VDC Supply required)

Note from RC Hobby Centre: This charger does not have a connection for batteries using ES2 connectors. See the Thunder T6 charger instead else you will need a Deans to ES2 adaptor cable.

Special Features:

Optimized operating software:
B6 features the so-called AUTO function that set the
feeding current during the process of charging or
discharging. Especially for Lithium batteries, it can prevent
the overcharging which may lead to an explosion due to
the user's fault. It can disconnect the circuit automatically
and alarm once detecting any malfunction, to achieve the
maximum safety and minimize the trouble. All the settings
can be configured by users.

Adaptable to various type of lithium battery:
B6 is adaptable to various types of lithium batteries, such
as li-ion, lipo and the new LiFe series of batteries.

-Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

- Individual voltage balancer for Lithium batteries
The B6V1 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

- Accept various types of Lithium battery
B6V1 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

- Maximum safety
Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

- Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- Robust outer aluminium case
High-quality aluminium case is durable and very efficient for cooling.


This field charger is design to be use from a 12V DC source or car battery.

To use this rapid charger in the home we suggest you purchase the 60VA AC mains adaptor on offer here:

Mains Adaptor: PSU-12V-5A


Operating voltage range:
DC 11.0 ~18.0 Volt
AC to DC adaptor (DC11.0 ~18.0V/5S)
Circuit power:
Max charge power 50W
Max discharge power 5W
Charge current range: 0.1~5.0A
Discharge current range: 0.1 ~1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd / NiMH battery cell count: 1 ~ 15 cell
Li-ion / Polymer cell count: 1~ 6 series
Pb battery voltage: 2V~ 20V
Weight: 277g (Net Weight)
Dimensions: Length:133mm, Width:87mm, Height: 33mm


Other Specifications:

Max Charge Power 50 Watts Max Discharge Power 50 Watts Discharge Current Range 0.1 ~ 1.0 Amps Current drain for balancing Li-Po 200mAh/cell Pb Battery voltage 2V~20V

User's setting-up parameters:

Lithium battery voltage types: LiIo: 3.6V, LiPo: 3.7V, LiFe: 3.3V
NiCd Delta-peak voltage sensitivity: 5 to 20mV
NiMH Delta-peak voltage sensitivity: 5 to 20mV
Battery temperature cut-off: 20 to 80C or OFF
Waste time between charge/discharge: 1 to 60 min.
Trickle charge mode: ON/OFF, up to 200mA
Integral timer limit for safety: 10 to 720 min. or OFF
Maximum charging capacity limit for safety: 10 to 9990mAh or OFF
Key beep and buzzer sound: ON/OFF
Input power low alert: 10 to 11V

5.00 out of 5 based on 1 ratings.
Showing our 1 review for NEW Digital LiPo LiON NiMH Battery balance & fast field charger. Write a review ›
  • Currently 5/5 Stars.
5I wish I got one of these years ago..

I bought this charger after 6 months of waiting hours to charge my buggy batteries. Now I can charge in under an hour and check the condition at the same time. Highly reccomended.

| Write a Review ›