Temperature Sensor (TO220) package with 600mm flylead suitable for T6 / B6 Battery Chargers etc.
Made for use with many rapid chargers on the market. This is the optional temperature sensor often not included when purchasing chargers and plugs into the side to monitor battery temperature during charging. This is often a preferred method of charge termination for fast charging of NiMh racing packs. These are made up here at RC Hobby Centre to order and offer a better accuracy due to the sensor tab being left open to the air. These are normally covered in heat shrink which can give a false reading.
As these are made to order please allow upto 5 working days if out of stock. We try to keep some in stock for next day dispatch.
Pinout: Black=0V, Red= 5V, White=Temperature Signal (nearest key tab) - See image
These have been tested with the Imax B6 and Thunder T6 and will also be compatible with the many other brands available on the market.
Please check the pin-out specifications in the image matches your chargers sensor port pinout.
Pinout: Black=0V, Red= 5V, White=Temperature Signal (nearest key tab)
These have been tested withe the Imax B6 and Thunder T6 and will also be compatible with the many other brands around.
Please check the pin-out specifications match your charger.