Items (0)

HSP XSTR Pro 1/10 Scale Top Pro 3S Brushless 4WD Off-Road Buggy 2.4GHz

  • Offers Available
  • Buy 3 or more items for 5% off (use code 5%OFF at the shopping basket)
£199.00 (Delivery from £10.00 )
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The Latest revision Top Spec 3S Pro Brushless version of the XSTR is for the experience RC driver. A favourite here at RC Hobby Centre and a capable nitro eater, these are the latest build which add some great improvements, with the addition of an all metal drive train, the very Latest 2720kv 3S Brushless Motor and Hobbywings new waterproof 60A Programmable brushless ESC. Add to that the uprated 6kg steering servo for improved high speed handling off-road.

Supplied with a 3S 11.1V Lithium Polymer Battery and charger, its Ready to Run complete with its 2.4GHz radio system. Just charge & Go!
The 3S is 24% faster again than the PRO spec using a 2S and 50% faster than the PRO on a stock NiMh pack.

Awesome Fun!

Wheelie off the line when you squeeze the included 2.4Ghz Pistol Grip Controller. The HSP XSTR Pro Top 3S Version is the most powerful 1/10 Scale Electric Buggy in HSP arsenal and its built tough to take it. Based on the PRO XSTR design, the Pro Top 3S has many familiar and new features like Coil Over Alloy Oil Filled Shocks, Fully Proportional Braking, Forward, Reverse, Full Ball Bearings and Specifically Designed All Terrain Tyres, just to name a few. Whether you are a professional racer or you just want to blow off your mate’s nitro, the new Pro 3S Version now comes with a new 2720kv higher torque Brushless Motor. Not only does this motor give the car a whopping 30% more speed on the 3S battery, it also screams around the track much longer due to the fact the brushless motor is 98% efficient and high capacity Lipo battery supplied.
The Pro Top 3S also comes with additional Hot Up blue alloy Race parts and the stunning 2 tone Chrome Factory Race Wheels, all Factory Installed.

This buggy comes 100% fully assembled straight out the box and a fully painted body.
For that individual look, many other alloy parts can be added for that individual look and all parts and hot-ups are stocked here at RC Hobby eStore.

Please note: this buggy is not recommended as a first RC hobby car. Handling experience at speed and Lipo battery knowledge is required.


  • 1/10 Scale XSTR-Pro Version Brushless.
  • Alloy Upper Deck.
  • Dual Alloy bodied Coil Spring Adjustable Shock Absorbers 55% More Travel.
  • Ready To Run. (everything included to get you racing)
  • 4 Wheel Drive via Alloy Shaft and all steel gearing.
  • Front and Rear Differentials.
  • Mid Mounted 11.1v 3S 3900mAh 25C (50C burst) Lithium Polymer Battery and Charger.
  • New Higher torque 2720KV Brushless Motor.
  • New Waterproof 60A Programmable Brushless Speed controller with fully proportional Forward Reverse and Brake.
  • New Front and Rear 5 Screw Differentials with all Steel Beveled Gears
  • New Steel Motor Pinion & Spur Gear.
  • Full 4 Wheel A-Arm 100% independent Adjustable Suspension.
  • Adjustable Height.
  • Adjustable Toe In, Toe Out.
  • New Even Lighter Smaller Front and Gear Boxes.
  • Uni DIRECTIONAL MT-X4 Tyres.
  • Strong Rigid ABS Monocoque Chassis.
  • Factory Installed Server Saver.
  • 2 Channel 2.4GHz Radio Control.
  • Pistol Grip Controller.
  • Hi Torque 6Kg Steering Servo.
  • Steering Trim.
  • Steering EPA
  • Throttle Trim.

This package includes:

  • 2-Ch 2.4GHz Transmitter
  • 100% Pre-assembled Car
  • Lipo Car Battery & Balance Wall Charger
  • Complete Instructions for Car /Full Parts Manual / Hot-up Parts brocure / ESC progamming manual.

You'll need:

8 X AA Batteries for the Transmitter (Sold in our store)


  • Chassis Type: ABS Rigid Monocoque Chassis
  • All Steel Drive train.
  • Scale: 1/10
  • Overall Length: 400mm
  • Overall Width: 250mm
  • Height: 160mm
  • Ground Clearance: 26mm
  • Gear Ratio: 7.195 (TOP) & 8.133:1 (STD)
  • Spur: #11184-64T Steel
  • Motor Pinion: #11176-26T Steel
  • Wheelbase: 275mm
  • Tire Diameter/Width (Rear): 86mm x 40mm
  • Tire Diameter/Width (Front): 86mm x 32mm
  • Body: Polycarbonate
  • Suspension: Four wheel independent
  • 6kg Steering Servo
  • Motor: HSP Brushless 2720KV
  • Motor RPM range: 0 - 30,192rpm
  • Hobbywing WP10-BL60 60A Waterproof Programmable Brushless Speed Control 2S or 3S Lipo or NiMh compatible.
  • 3600mAh Now 3900mAh 3S 11.1V Lipo Hard Case Battery included!


5.00 out of 5 based on 1 ratings.
Showing our 1 review for XSTR Pro 1/10 Scale Top Pro 3S Brushless 4WD Off-Road Buggy 2.4GHz. Write a review ›
  • Currently 5/5 Stars.
5The wait was worth it!

I am new to the rc vehicle world and have been waiting for 5 months to go halfs on it with my parents.. This infact is my 1st buggy, and what a buggy... It has blistering speed and the ability to outrun actual cars quite easily. The lipo worried me because i heard that it is the Worlds Most Dangerous Battery! But even with the 3000mAh nimh (supplied here) it was just as good. I love it, i have given it a awsome sticker job with redbull and supporting stickers. Thanks RChobbieEstore...

| Write a Review ›