Pro RC Split Alloy Wheel Hex Drive Nuts 12mm fits any 1/10 RC car, buggy or Trucks which use a 5mm axle and 12mm Hex drive/ wheels.
Professional split Hex drive nuts with clamp screws and drive pins.
If your changing you wheels regularly between races or differnt terrains then these are a must have. Unlike regular hex drive nuts, these clamp in place on the axle elliminating the wheel nut tightening issue on certain models. You will be able to tighten you whhel nuts without effecting the resistance against the hub bearing as it is clamped to the actual axle instead of being just compress over the pin.
Each alloy nut has a split in it to allow it to be tightened onto the axle using the supplied screws.
No more lost Drive Nuts or pins falling out during wheel changes !
The set consists of 4 split alloy drive nuts, 4 stainless steel pins and clamping screws.
These can replace: HSP / Himoto 02100, 102042, 122042, 102042B and many other brands that use this size. Not suitable for 1/16 scale.
MPN: 102042 S Pro
Despription: Split aluminium 12mm Hex wheel drive nut set for 1/10 scale sized vehicles.
Contents:
Wheel Hex Size 12mm
Axle size: 5mm
Pin size: 10mm x 2mm