Hobbywing's WP10-BL50 50A/300A Sensorless Brushless Sport ESC for RC Car, Buggy or Truck.
From Hobbywings lastest series of waterproof brushless Speed Controller series and is the 50A (300A) sensorless version.
We supply these ready fitted with Deans T-Plug battery connector, no soldering is required. Perfect for many 1/10th Scale PRO brusless Cars Buggies & Trucks.
Features
Specifications
Current - 50A/300A
Input - 4-9 Cells NiMH, or 2-3S Lipo
BEC Output - 6V/3A (Switch Mode)
Resistance - 0.0010 Ohm
Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating,
The stock fan can work with 2S and 3S Lipo
Weight - 90g
Size - 48.5(L)X38(W)X32(H)mm
Motor Limit - For 2S Lipo or 6 cells NiMH
On-road: 3650-size or smaller motor with the KV<6000
Off-road/Buggy/Monster: 3650-size or smaller
motor with the KV<4000
Motor Limit - For 3S Lipo or 9 cells NiMH:
On-road: 3650-size or smaller motor with a KV<4000
Off-road/Buggy/Monster: 3650-size or smaller motor with a KV<3000
Model Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT
Programmable Items
1. Run Mode: Forward/Brake - Forward/Reverse/Brake - Forward/Reverse.
2. Drag Brake Force: 0%, 5%, 10%, 20%, 40%, 60%, 80%, 100%
3. Low Voltage Cut off: Disabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/Cell
4. StartMode (Punch): 9 levels (default is 5)
5. Max Brake Force: 25%, 50%, 75%, 100%, Disabled
6. Max. Reverse Force: 25%, 50%, 75%, 100%
7. Initial Brake Force: (=drag force), 0%, 20%, 40%
8. Throttle Range: 6%, 9%, 12%
9. Timing: 0.00°, 3.75°, 7.50°, 11.25°, 15.0°, 18.75°, 22.5°, 26.25°
Factory default settings are shown in bold.
Specifications
Current - 50A Continous - 300A Peak
Input - 4-9 Cells NiMH, or 2-3S Lipo
BEC Output - 6V/3A (Switch Mode)
Resistance - 0.0010 Ohm
Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating, the stock fan can work with 2S and 3S Lipo.
Weight - 90g
Size - 48.5(L)X38(W)X32(H)mm
Motor Limit - For 2S Lipo or 6 cells NiMH
For 3S Lipo or 9 cells NiMH:
Model Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT
Motor connectors: 4mm female bullet.
Battery connector: T-Plug (Deans) fitted.