Hobbywing's Lastest WP10-BL60 60A Sensorless Brushless Sport ESC for RC Car, Buggy or Truck.
From Hobbywings lastest Sport series waterproof brushless Speed Controller series and is the 60A (360A) sensorless version.
We supply these ready fitted with ES2 (4mm Bullet) battery connectors, no soldering is required. Perfect for all HSP 1/10th Scale PRO brusless Cars Buggies & Trucks.
Features
Specifications
Current - 60A/390A
Input - 4-9 Cells NiMH, or 2-3S Lipo
BEC Output - 6V/3A (Switch Mode)
Resistance - 0.001 Ohm
Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but
not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating,
The stock fan can work with 2S and 3S Lipo
Weight - 90g
Size - 48.5(L)X38(W)X32(H)mm
Motor Limit - For 2S Lipo or 6 cells NiMH
On-road: 3656-size or smaller motor with the KV<6000
Off-road/Buggy/Monster: 3656-size or smaller
motor with the KV<4000
For 3S Lipo or 9 cells NiMH:
On-road: 3656-size or smaller motor with a KV<4000
Off-road/Buggy/Monster: 3656-size or smaller motor with a KV<3000
Model Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT
Programmable Items
1. Run Mode: Forward/Brake - Forward/Reverse/Brake - Forward/Reverse.
2. Drag Brake Force: 0%, 5%, 10%, 20%, 40%, 60%, 80%, 100%
3. Low Voltage Cut off: Disabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/Cell
4. StartMode (Punch): 9 levels (default is 5)
5. Max Brake Force: 25%, 50%, 75%, 100%, Disabled
6. Max. Reverse Force: 25%, 50%, 75%, 100%
7. Initial Brake Force: (=drag force), 0%, 20%, 40%
8. Throttle Range: 6%, 9%, 12%
9. Timing: 0.00°, 3.75°, 7.50°, 11.25°, 15.0°, 18.75°, 22.5°, 26.25°
Factory default settings are shown in bold.
Specifications
Current - 60A Continous - 390A Peak
Input - 4-9 Cells NiMH, or 2-3S Lipo
BEC Output - 6V/3A (Switch Mode)
Resistance - 0.001 Ohm
Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating, the stock fan can work with 2S and 3S Lipo.
Weight - 90g
Size - 48.5(L)X38(W)X32(H)mm
Motor Limit - For 2S Lipo or 6 cells NiMH
For 3S Lipo or 9 cells NiMH:
Model Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT
Motor connectors: 4mm bullets fitted.
Battery connector: Deans T-PLUG fitted.