ESC 20A Brushed Motor Speed Controller, Reversable w/ Brake
Ideal for smaller DIY RC vehicles, tank or boats. Fully proportional forward and reverse operation. Can be used with or without forward braking function.
Auto neutral detection at switch on.
There is a small selector switch on the board to enable or disable the brake feature option.
Start up tone reflects the current set brake mode.
Rising 3 tones indicates brake mode diabled.
3 equal tones indicates brake mode enabled.
Brake On / Brake Off option can be set using the on board switch.
Power connector: JST male (pins)
Motor connector: JST female (no pins)
Receiver connector: JR / Futaba (Universal)
This Speed Controller is ideal for 130/180/260/280 & 380 size Brush Motors.
Package Includes:
1 x Brush Motor Speed Controller with JST connectors fitted.
Specifications:
20A brushed motor electronic speed controller.
Functions: forward brake, reverse or just Forward and reverse.
Working voltage: 4.2V - 9.4V.
Min voltage: 3.0V
Max Current rating: 20A
Drive frequency: 1.45KHz
Input: 2S Li-Po, Ni-Mh/Ni-cd 4-7cell
BEC: 5V 1A
Constant current: 10A
Surge current: 25A< 1s
Dimensions: (L*W*H) 27*23*6.5mm excluding wires.
Weight: 12g including wires.
Brake On / Brake Off option can be set using the on board switch.