Wind Hobby NEW Wind Hobby "SWAN" 1/16 Full Race Electric RC Off-Road Truggy with 2.4GHz Radio

Wind Hobby's New Monster Truggy is Ready To Run and comes packed full of the latest race features.

This model is identical to the HSP Hunter.

The 4 Wheel Drive Transmission is equipped with a heavy-duty gear diff with precision bevel gears. The radio system is fully proportional with servo reversing, a forward / reverse MOSFET Electronic Speed Control, and features the latest digital 2.4G crystal free radio gear. Power comes from a high output rechargeable 7.2 volt 1100mah NiMh battery supplied.

The new 2.4G Radio means longer range, no crystals, no external interference and no interference from other cars. The intelligent digital radio automatically flicks between different channels so you will never have a car on the same channel. Not to mention no aerials to snap on the car and transmitter.

Of course replacement parts are available as well as many hot up parts too for the professional racer.

This Truggy is 100% Fully Assembled straight out of the box.

Features:

• HSP 1/16 Scale Monster Truck
• 8 Alloy Cap Coil Over Spring Shock Absorbers, 55% More Travel
• Alloy Centre Shaft
• 4 Wheel Drive
• Front and Rear Differentials with Bevel Gears
• Mid Mounted 7.2v 1100mAh NiMH re-chargeable Battery
• New RC380 Hi-Torque electric motor
• New Upgraded Forward / Reverse / Brake Electronic Speed Control
• Full 4 Wheel 100% independent Suspension
• Adjustable Height
• Adjustable Toe In, Toe Out
• New Even Lighter Smaller Front and Gear Boxes
• MT-X4 Tyres
• Strong Rigid ABS Monocoque Chassis
• Factory Installed Server Saver
• 2 Channel Radio Control
• Pistol Grip
• Hi Torque MG995 Steering Servo
• Steering Trim
• Throttle Trim
• Complete Instructions for car and radio included

This package includes:

• New 1/16th Scale Radio Controlled Truck RTR
• Complete 2.4G Radio Control Fully Installed
• 100% Pre-assembled Car
• Instructions for Car and Radio

Note: Manufactures occasionally make small changes to the specifications and body colours.

You'll need:

8 X AA Batteries for the Transmitter (Sold in our store)

Specifications
• Chassis Type: ABS Monocoque Chassis
• Scale: 1/16th
• Overall Length: 280mm
• Overall Width: 191mm
• Height: 120mm
• Ground Clearance: 18mm
• Gear Ratio: 8:9.1
• Wheelbase: 174mm
• Tire Diameter F/R: 65mm
• Body: Polycarbonate
• Suspension: Four wheel independent
• Motor: RC380 Hi-Torque
• ESC: SP03018